G700 Comp

Return to Models View Timeline

Richard Hartmann (Rich23)

Helicopter

SAB Heli Division

Goblin 700 Competition

Optiguard

Kosmik internal BEC @7.4v

Cyclone 695mm

Kosmik 160A

NEO Pro Rescue

Scorpion 4525 Ultimate

MKS HBL950/980 HV

109 flights, 9.08 hours flying time, 0 crashes

146 flights, 12.17 hours flying time, 0 crashes

Flights by Month

Sessions

Sun, 2 Jul 2017 10:00
Eynsford Model Helicopter Club
6 flights
Sun, 25 Jun 2017 10:00
Eynsford Model Helicopter Club
4 flights
Sun, 18 Jun 2017 10:00
Medway Massive RC
6 flights
Sun, 11 Jun 2017 10:00
Eynsford Model Helicopter Club
7 flights
Sun, 4 Jun 2017 10:00
Eynsford Model Helicopter Club
6 flights
A lovely session with the comp. Started to get back in the groove and get some new moves in. Had a flight with the BN after rebuilding the tail and all seems good. Tony had a flight on the BN and after the flight when I disconnected the 2S LiPo the connector came away from the BEC. I'm really starting to think nitro is not for me.
Sun, 28 May 2017 09:30
Eynsford Model Helicopter Club
4 flights
What looked to be a great day flying turned in to a frustrating day flying. The black nitro was grounded after a very noisy tail wag problem which I'm hoping is the dampers in the tail. On the last flight with the electric the canopy came off mid flight and went through the blades. Only damage is the canopy is a write off and some marks on the blades.
Sun, 21 May 2017 10:00
Eynsford Model Helicopter Club
4 flights
A great day at the field. Lovely weather but the wind picked up towards the end.
Sun, 14 May 2017 10:00
Eynsford Model Helicopter Club
2 flights
A great session. Finally got the nitro to stay in the air for more than a minute and got 3 great flights on it
Sun, 7 May 2017 10:00
Eynsford Model Helicopter Club
4 flights
Managed to maiden the black nitro today! Had a minute in the air before the tail gave out and had to hit throttle hold. Luckily the tail jammed up but I still managed to panic and it came down on the wonk on landing. Looks like I forgot to loctite the tail control pivot screw, so out it came in flight. The tail blades managed to hit the control rod as it was flapping about. Lost most of the assembly but managed to find a few bits. Had 4 flights on the 700 Comp after and lost a bit of confidence so nothing special. Thanks to Dean for all the help at the field.
Sun, 23 Apr 2017 09:45
Eynsford Model Helicopter Club
6 flights
A great day at the field today. More practise and even managed a rough/messy piro flip!
Mon, 17 Apr 2017 09:45
Eynsford Model Helicopter Club
4 flights
Windy and cold on the hands. Not a great session but good to get out
Sun, 9 Apr 2017 10:00
Eynsford Model Helicopter Club
8 flights
A great day out in the sunshine.
Sun, 2 Apr 2017 09:45
Eynsford Model Helicopter Club
6 flights
Had a great day with the first BBQ of the year at Eynsford. Got the EXO dialled in and got the 700 Comp doing some backwards and inverted stuff.
Tue, 28 Mar 2017 07:00
Medway Massive RC
3 flights
Sun, 26 Mar 2017 09:30
Eynsford Model Helicopter Club
2 flights
The wind was unbearable in the end. 18MPH + straight in the face with gusts to 35MPH. On the plus side got the Exo in the air and got some settings sorted out. Just need a calm day to get it dialled in.
Fri, 17 Mar 2017 06:50
Medway Massive RC
3 flights
Nipped to the field before work and meet Dean for a early session.

Sun, 12 Mar 2017 11:30
Eynsford Model Helicopter Club
2 flights
Got a few quick flights in-between the showers
Sat, 11 Mar 2017 15:20
Medway Massive RC
3 flights
Met up with Tony and had 3 quick flights at the Massive. Got some backwards and inverted practise in and went over some basic orientation practise.
Sun, 26 Feb 2017 10:00
Eynsford Model Helicopter Club
3 flights
A lovely trip to the field but Doris put a dampener on my flying. The wind was just too strong and the gusts made it horrible to fly in. Got some backwards stuff in and had a close call when flying into the wind as the gusts were strong and pushed the disk down almost in to the ground!
Sat, 18 Feb 2017 12:00
Medway Massive RC
4 flights
Went to the field after work and met up with Tony. Had a good little session but was a little rusty. Got some backwards flying and inverted flying in.
Sun, 12 Feb 2017 10:00
Eynsford Model Helicopter Club
2 flights
Very cold but got some backwards and inverted flying practise in. Just need the weather to improve so I can get more stuff to the field.

A little bit muddy today too
Sun, 5 Feb 2017 10:00
Eynsford Model Helicopter Club
4 flights
Foggy and cold. Got some backwards flying and inverted nose first flying in for some more practise but the wind was icy on the hands.
Sun, 29 Jan 2017 10:00
Eynsford Model Helicopter Club
4 flights
Turned up and had nothing but rain for the first half hour, I thought it would be a crappy day but the weather cleared up and got 6 packs flown. 2 on the Protos 780 and 4 on the 700 Comp. The Protos still has me undecided on weather to keep it stretched or not, but I will give it a few more flights before I decide weather to return it to 700 or not. The Goblin came out just in time for the wind to pick up! Still had some good flights and on the last one started with some backwards flying and moving about while inverted.
Sun, 22 Jan 2017 09:40
Eynsford Model Helicopter Club
4 flights
A great day at Eynsford, although frosty its was sunny and low wind speed. Managed to maiden the Protos Max V2 780 which was rather rubbish. Spoke to Jim and managed to see were I went wrong with the rates and gains so a quick adjustment and wow, a great flying heli. Maybe need a tuning flight or two to get it dialled but extremely happy with it now.
Sun, 8 Jan 2017 10:00
Eynsford Model Helicopter Club
8 flights
A great session at Eynsford today to kick off the 2017 season. Just went over the stuff I knew to keep the thumbs greased and a few gentle flights on the new Opti packs.
Sat, 31 Dec 2016 11:30
Medway Massive RC
3 flights
A great little session to push the total number of flight for the year past 450. I had aimed for 500 but can't grumble! Roll on next year.

Happy New Year!
Thu, 29 Dec 2016 11:00
Eynsford Model Helicopter Club
4 flights
A great day out at Eynsford. Shame about the cold on the hands but a great day flying.
Sun, 18 Dec 2016 09:30
Medway Massive RC
5 flights
A great session at the field this morning with the guys, no wind but no sun either! The fog wasn't to bad and did lift but the sky was horrible for the first hour or so.
Sun, 11 Dec 2016 10:00
Medway Massive RC
3 flights
Sun, 4 Dec 2016 14:00
Medway Massive RC
3 flights
Popped in to finish off the rest of my packs on the way home from ARA. Cold thumbs and wind coming towards made it difficult!
Sun, 4 Dec 2016 11:00
ARA
3 flights
Very cold on the hands and the wind was straight in your face. A difficult session.
Sun, 27 Nov 2016 11:00
Medway Massive RC
4 flights
A surprisingly good session going over flips, rolls, piro's and tried to keep things flowing with transitions. Some worked some didn't but I feel like I progressed. Need to get on the sim to learn some new stuff.
Sat, 19 Nov 2016 11:00
Medway Massive RC
2 flights
Managed to get to the field for a couple of flights in the sunshine. A nice but cold session
Tue, 15 Nov 2016 11:30
Medway Massive RC
2 flights
Popped to the field for a couple of flights. Had a play with the headspeed and settled on 2030 rpm, will see how that goes.
Sun, 13 Nov 2016 10:00
Medway Massive RC
6 flights
A great morning at the massive with 6 flights on the G700 Comp. On the first flight the balance plug came loose and got stuck between the frame and motor belt causing it to wear down through 2 pins. Luckily no shorting and the battery survived to fight another day. Had a few tuning flights to get it dialled in to my liking then had a few test flights to check settings.
Fri, 11 Nov 2016 13:45
Medway Massive RC
2 flights
Had a great session at the field this afternoon in the sun and very little wind. I managed to finish the Goblin 700 comp in time and get its maiden done. Had a tuning flight after and got started on dialling it in. 😃 A very happy bunny


Comments

Add Comment


Suggest an update to this page.