T-Rex 600N

Return to Models View Timeline

Michael Parker

Helicopter

Align

Align T-Rex 600N

Edge 603

BeastX

Rotor Rage 30%

OS 55HZ-R

JR R921 DSM2

Align DS610

This is my first large scale heli, first nitro heli, and second heli ever.

16 flights, 1.90 hours flying time, 0 crashes

16 flights, 1.90 hours flying time, 0 crashes

Flights by Month

Sessions

Sat, 16 Sep 2017 12:45
Fredericksburg Area RC Club
1 flights
Pretty good day at the field. Dad and I flew the Yellow trainer and Dad landed it. A little rough but nothing broke. I flew my Stryker for the first time in years and on an EDF 3700KV motor swinging a 4x4.5 prop. It was great and was about as fast as the stock motor. Time to put in the 4S next!!!
Sat, 16 Sep 2017 12:45
Fredericksburg Area RC Club
1 flights
Pretty good day at the field. Dad and I flew the Yellow trainer and Dad landed it. A little rough but nothing broke. I flew my Stryker for the first time in years and on an EDF 3700KV motor swinging a 4x4.5 prop. It was great and was about as fast as the stock motor. Time to put in the 4S next!!!
Mon, 11 Sep 2017 13:15
Fredericksburg Area RC Club
1 flights
Kind of a mixed day. Dad and I went to the field and were the only ones there. It was very windy which wasn't fun on the planes. Dad's Yellow Trainer flew great and ran smooth. My little Red Trainer however, didn't run good at all. We struggled with the tune and the engine cut off in flight. We then decided to call it quits on that plane for the day. I was getting my nitro heli tuned very well and when I was running very low on fuel, I did one final auto. I then decided to do a skidding auto. But at about two feet off the ground, I realize that I had these massive rubber grommets on the skids and I knew the heli was just going to stop dead. So I pulled back but didn't have the head speed and botched the auto. A link popped off and one plastic servo horn stripped. I got very lucky!
Mon, 4 Sep 2017 19:00
Home
1 flights
Still tuning the engine. It's starting to get a lot better now.
Sun, 3 Sep 2017 15:30
Fredericksburg Area RC Club
1 flights
Great day at the field today! I got my dad out and buddy boxed him. He loved it. He's starting to remember more and more about flying! I had a great time with him today!😀
Sat, 2 Sep 2017 17:45
Fredericksburg Area RC Club
1 flights
Flew at the field after work. It was raining off and on. A lot of mist mainly.
Sat, 26 Aug 2017 12:15
Friends House Hazelwood
1 flights
Still very rich but flies so good!!!
Mon, 14 Aug 2017 15:25
Fredericksburg Area RC Club
1 flights
I had a great day at the field today!!! I flew my Fireball and 420 but I really enjoyed my T-Rex 600N! I finished breaking in the new OS .55HZ-R engine and started to lean it out and start flying it. It is still very rich and I still need to lean it out A LOT! But I was having fun. On my last flight, I had a very loud squeaking coming from the main rotor head. It's most likely a bearing in the main bearing block. I'll find it soon. Overall, a great day!!! :D
Mon, 14 Aug 2017 15:25
Fredericksburg Area RC Club
1 flights
I had a great day at the field today!!! I flew my Fireball and 420 but I really enjoyed my T-Rex 600N! I finished breaking in the new OS .55HZ-R engine and started to lean it out and start flying it. It is still very rich and I still need to lean it out A LOT! But I was having fun. On my last flight, I had a very loud squeaking coming from the main rotor head. It's most likely a bearing in the main bearing block. I'll find it soon. Overall, a great day!!! :D
Mon, 14 Aug 2017 15:25
Fredericksburg Area RC Club
1 flights
I had a great day at the field today!!! I flew my Fireball and 420 but I really enjoyed my T-Rex 600N! I finished breaking in the new OS .55HZ-R engine and started to lean it out and start flying it. It is still very rich and I still need to lean it out A LOT! But I was having fun. On my last flight, I had a very loud squeaking coming from the main rotor head. It's most likely a bearing in the main bearing block. I'll find it soon. Overall, a great day!!! :D
Mon, 14 Aug 2017 15:25
Fredericksburg Area RC Club
1 flights
I had a great day at the field today!!! I flew my Fireball and 420 but I really enjoyed my T-Rex 600N! I finished breaking in the new OS .55HZ-R engine and started to lean it out and start flying it. It is still very rich and I still need to lean it out A LOT! But I was having fun. On my last flight, I had a very loud squeaking coming from the main rotor head. It's most likely a bearing in the main bearing block. I'll find it soon. Overall, a great day!!! :D
Mon, 14 Aug 2017 15:25
Fredericksburg Area RC Club
1 flights
I had a great day at the field today!!! I flew my Fireball and 420 but I really enjoyed my T-Rex 600N! I finished breaking in the new OS .55HZ-R engine and started to lean it out and start flying it. It is still very rich and I still need to lean it out A LOT! But I was having fun. On my last flight, I had a very loud squeaking coming from the main rotor head. It's most likely a bearing in the main bearing block. I'll find it soon. Overall, a great day!!! :D
Thu, 29 Jun 2017 12:25
Home
1 flights
Replaced the clutch and now I have headspeed again! Third breakin tank. Just pitch pumped it in my yard to load the engine. It sounded really good. Still very rich but that's a good thing. Haha.
Fri, 23 Jun 2017 12:10
Delaware RC Club
1 flights
I had a very bad day at HOD. Nothing was going right. My nitro clutch went out, one of my 180's ESC was shorting out, I blew up a brand new inverter. And to top it all off, that speed up gear was way too fast on the tail. Causing the heli to fly unstable and sounding really pissed off. I got too low in a full speed funnel and plowed it into the ground. I bent the boom almost 90 degrees without kinking it. It was a perfect bend. Tail shaft bent, broke one tail boom support rod, and that's all I found so far. Not a good day for me... :(
Tue, 9 May 2017 21:05
Home
1 flights
Second tank of fuel in the break in on my nitro.
Two good night flights on my 180 under the moon light and with my custom night blades.
Sat, 6 May 2017 22:55
Fredericksburg Area RC Club
1 flights
I still need to work more on the E7SE but it's getting better.

I finally flew my T-Rex 600N and put the first tank through the break in process. Flew it under the lights.

I flew the 180 again with the night blades on Saturday night of the fun fly. Matt Botos was commentating my flight which made me fly a little harder than normal. I got inches from the ground a few times and just hearing the crowd cheer made me feel like a pro. (Even though I'm not. Haha) Extremely fun!!!


Comments

Add Comment


Suggest an update to this page.