Oxy 2

Return to Models View Timeline

Hobee

Helicopter

Oxy Helicopter

Oxy 2

190mm

Turnigy Plush 30a with blheli Firmware

Mini vBar decased

Align 250mx 3600kv

Lemon RX Satellite

BlueArrow, Corona 919mg

48 flights, 3.55 hours flying time, 0 crashes

48 flights, 3.55 hours flying time, 0 crashes

Flights by Month

Sessions

Fri, 28 Jul 2017 17:00
Cologne, North
3 flights
I am still not completely happy with the helis behaviour. It still has a slight shake, which is not like a fast tail wag. So I decided to start over. I set up one bank in the FBL with the default settings which have a lot higher gains than what I am flying at the moment. I just wanted to see how much more the heli would shake with those settings. I was amazed to see, that the shaking did not get worse. The tail wag is a little bit faster, but not really worse than before. And the heli seems to fly a lot better. Of course it was difficult to tell because of the wind. But I think I am on the right track with higher gains.
Mon, 24 Jul 2017 12:00
Cologne, South
2 flights
It was kind of rainy, but I managed to squeeze two quick flights in. I am still amazed how well the little heli handles the wind.
Wed, 19 Jul 2017 12:00
Cologne, South
3 flights
Tue, 18 Jul 2017 12:00
Cologne, South
3 flights
Mon, 17 Jul 2017 12:00
Cologne, South
3 flights
Thu, 13 Jul 2017 12:00
Cologne, South
3 flights
Wed, 12 Jul 2017 12:00
Cologne, South
2 flights
Flights cut short by heavy rain starting. Good thing I could just grab the heli and take it in the car to unplug 😀
Mon, 10 Jul 2017 12:00
Cologne, South
3 flights
Throwing the Oxy 2 around like crazy. Not that relaxing but lots of fun
Fri, 7 Jul 2017 12:00
Cologne, South
3 flights
A bit windy
Thu, 6 Jul 2017 12:00
Cologne, South
3 flights
I was amazed how well this little heli handles the wind. Still, I enjoy it a lot more in calmer conditions
Wed, 5 Jul 2017 12:00
Cologne, South
3 flights
Just flying around and working on tuning the gains
Tue, 4 Jul 2017 17:00
Cologne, Bocklemuend
3 flights
I used the lunchbreak to fix the blade tracking and then after work I was able to fly and it was really nice. Really happy with the result of the work on the heli
Mon, 3 Jul 2017 17:00
Düsseldorf
1 flights
Did some work on the heli to get rid of vibrations. Made a test flight and noticed that the blade tracking was way off after this.
Thu, 29 Jun 2017 12:00
Cologne, North
Cologne, South
2 flights
The small Oxy seems to handle the wind quite well. It was good feeling to fly the T-Rex 500 after a relatively long pause.
Wed, 28 Jun 2017 12:00
Cologne, South
1 flights
Had to abort the flight because it started raining. Managed the first flips and loops before that. I noticed that the heli has a tendency to move up and down during fast forward flight.
Tue, 27 Jun 2017 16:00
Düsseldorf
2 flights
Just regular flights.
Mon, 26 Jun 2017 09:00
Düsseldorf
4 flights
good flights. Tail is still not solid, but I had too much fun just flying around to mess with it. I noticed that I fly really agressive with this small bird, although it is not tuned, yet. It already is lots of fun.
Mon, 26 Jun 2017 09:00
Düsseldorf
2 flights
good flights. Tail is still not solid, but I had too much fun just flying around to mess with it. I noticed that I fly really agressive with this small bird, although it is not tuned, yet. It already is lots of fun.
Tue, 20 Jun 2017 08:30
Düsseldorf
1 flights
First real flight on the Oxy. The tail still needs a lot of tuning, but it was a lot better than the first hover. I enjoyed the flight, but I must say that this heli is FAST.
Sun, 18 Jun 2017 16:00
Düsseldorf
1 flights
Maiden flight of my Oxy2. The tail gain was a lot too high so I just hovered a bit. A maiden flight is always exciting anyways


Comments

Add Comment


Suggest an update to this page.